DSS - Catia

Logo

Icam Technologies is OSD partner for DSS. The PSE solution is then integrated in Catia V5 and supports all CAM modules V5 (and V4). A Specification PPTABLE is provided to support the full feature of V5 and V4. It's possible to use Virtual Machine through a direct interface to V5 or Delmia (necessary in this case CE) as integrated emulator for the machine tool.

Siemens - UGS NX

Logo

PSE supports NX from the first version and is interfaced with the system through the exit CLS. For versions 6/7 the post-processor is integrated into the NX menu without changes. Modules are supported Milling, Turning and Combined. Cam-Post enables support of ESU NX addition to the complete set of commands of the CLS (customizable via tcl).

PTC - Wildfire

Logo

PSE supports Pro | NC from version 12 up today (Creo), and interfaced with the system through the exit NCL. Fully supports all forms of CAM Pro | E. Starting with version WF3 M120 is available direct interface with Virtual Machine for milling module, which allows seamless integration of PSE with the environment of Manufacturing.

Mastercam

Logo

PSE supports Mastercam from version 7 up today (X), and is interfaced with the system through the exit NCI. Fully supports modules Mill and Lathe, whether or not combined. From version X3 is available direct interface with Virtual Machine for milling and turning module, which allows seamless integration of PSE with the environment of Manufacturing.

Delcam - Powermill

Logo

PSE supports Powermill since 2000 and is interfaced with the system through the output ascii file CUT. We support all forms of multi-axis milling.

Open Mind - Hypermill

Logo

PSE supports Hypermill since 2000 and is interfaced with the system through the exit APT, available as an option. We support all forms of multi-axis milling and customization commands within the CAM.

Sescoi - Work-NC

Logo

PSE supports NC Work-from version 16 and is interfaced with the system through the exit APT. We support all forms of multi-axis milling.

Cimatron

Logo

PSE supports 90 and Cimatron Cimatron E and is interfaced with the system through the exit APT standard of the two systems. We support all forms of multi-axis milling.

TopSolid

Logo

PSE supports Topsolid since 2010 and is interfaced with the system through a direct reading of the file cam, and fully supports modules Mill and Lathe, whether or not combined. From the 2010 version is available direct interface with Virtual Machine for milling and turning module, which allows seamless integration of PSE with the environment of Manufacturing.

Concepts Nrec

Logo

PSE supports NREC since 2009 and is interfaced with the system through the exit standard APT system. We support all multi-axis milling modules in the software.

Cadds5 - Cadra - Camand - GNC - Ideas - Intergraph - Nicam - Pathrace - Surfcam

These systems are currently supported officially by Cam-Post / Virtual Machine / Control Emulator through the exit APT owner of the system or a binary CAM. For the moment there are no interfaces for Virtual Machine for these systems.