Fanuc

Logo

We support the PSE solution for all controls until the series 0i to the last Series 30 and 31 machines Milling-Turning-Laser-Edm, up to and beyond 5 continuous axes. The features TCP, and Hsm TWP are supported by the Post-Processor drilling canned cycles owners.
For controls with RS232 and Ethernet have the technology to connect DNC. CNC enabled may run continuously from RS232.

Siemens

Logo

We support the PSE solution for all controls until the last M-series and D-series, for machines Milling-Turning-Laser-Punching, up to and beyond 5 continuous axes. Are supported by the Post-Processor drilling canned cycles owners, the TCPM, FRAME and Hsm features. CE can use the form VNCK. For controls M and D have the technology with RS232 connection DNC.

Heidenhain

Logo

We support the PSE solution for all controls 3-series until the last 6 series, and for the controls Millplus for machines Milling-Turning up and over 5 continuous axes. RTCP PLANE Hsm features are supported by the Post-Processor drilling canned cycles owners. ISO language or conversational. For controls with RS232 connection DNC have the technology for both ISO and conversational language.

Mazak

Logo

We support the PSE solution for all controls of the series for Mazatrol machines Milling-Turning up and over 5 continuous axes. Are supported by the Post-Processor drilling canned cycles owners, features TCP, TWP and Hsm in ISO language. PSE does not support the language Mazatrol. For controls with RS232 port, you can connect via DNC for both ISO language that Mazatrol, from memory or tape.

Mori Seiki

Logo

We support the PSE solution for all controls of the series MAPPS for machines Milling-Turning up and over 5 continuous axes.
Are supported by the Post-Processor drilling canned cycles owners, features TCP, TWP and HSM. For controls with RS232 port have the technology to connect DNC.

Selca

Logo

We support the PSE solution for all controls from the series 1000 to 4000 for milling machines up to and beyond 5 continuous axes.
Are supported by the Post-Processor drilling canned cycles owners, features TCP, FRAME and HSM. For controls with RS232 port have the technology to connect DNC. For the 1000 series is supported by continuous processing RS232.

Fidia

Logo

We support the PSE solution for all controls from the 10 to the 20 series of milling machines up to and beyond 5 continuous axes.
Are supported by the Post-Processor drilling canned cycles owners, features TCP, FRAME and HSM. For controls with RS232 port have the technology to connect DNC.

Elexa

Logo

We support the PSE solution for all controls from the 200 series 600 for milling machines up to and beyond 5 continuous axes.
Are supported by the Post-Processor drilling canned cycles owners, features TCP, FRAME and HSM.
For controls with RS232 port have the technology to connect DNC.

D.Electron

Logo

We support the PSE solution for all controls Z16 and Z32 for milling machines up to and beyond 5 continuous axes.
Are supported by the Post-Processor drilling canned cycles owners, features TCP, FRAME and HSM. For controls with RS232 port have the technology to connect DNC.

ECS

Logo

We support the PSE solution for all controls from the 2300 series to 900 for milling machines up to and beyond 5 continuous axes.
Are supported by the Post-Processor drilling canned cycles owners, features TCP, FRAME and HSM. For controls with RS232 port have the technology to connect DNC.

OSAI

Logo

We support the PSE solution for all controls of the old 8-series and the new series 10, for milling machines up to and beyond 5 continuous axes in ISO mode. Are supported by the Post-Processor drilling canned cycles owners, features TCP, FRAME and HSM. For controls with RS232 port have the technology to connect DNC.

Okuma

Logo

We support the PSE solution for all controls of the old series to the new 7 series P200 for Milling and Turning machines up to and beyond 5 continuous axes in ISO mode. Are supported by the Post-Processor drilling canned cycles owners, features TCP, FRAME and HSM. For controls with RS232 port have the technology to connect DNC.

ABB - Olivetti - General Electric - Agie - Charmilles - Bosh - Grundig - Philips - Fadal - Fagor - Sodick - Toshiba - Jobs - Elsag...

There are, in the past and present history of CNC, many prestigious brands often the disclosure of which is now much reduced. For many of these CNC solutions have already been developed and tested as belonging to our town. For all those not mentioned above we are able to produce and examine the development of Post-Processors dedicated, including simulation of the machine tool, and its connectivity DNC.